Lynx Studio Technology
home products news & events support how to buy company contact
Search
Support Center
Downloads
Contact Tech Support

Frequently Asked Questions
Aurora
LynxONE
LynxTWO/L22
Lynx AES16 / AES16e
Lynx LS-ADAT / LS-AES
LT-HD

Software Application Notes
Hardware Test Procedures
Connector Pin Outs
Other useful documents
Videos
Support Documents
Support Forum
User Manuals
Register Your Products
Buy Cables Now
LynxTWO/L22
• Getting Started/Installation
• Troubleshooting
• Operation
• Compatibility


  • Running an ASIO application and bit-depth says 32-bit in Lynx Mixer despite project bit-depth.
  • When playing back a stereo sound file through any of the outputs, there is signal on the analog inputs.
  • The Lynx Mixer reports a sample rate of 22k when I first boot into Windows. Why?
  • I’m trying to send audio out of the digital outputs and there is no signal being received by my destination device.
  • I cannot change the clock source in the Lynx Mixer – it keeps reverting back to the previous setting
  • My computer is not recognizing the Lynx card. What could be wrong?
  • I installed your Version 2/ WDM drivers and now I’m not getting meter activity in my application.
  • I get clicks and pops when I increase my sample rate to 96k. Is there a compatibility problem?
  • When I log into my Windows 2000/XP computer as an Administrator everything works fine. When I log in as a User, I cannot use my LynxTWO/L22. When launching the Lynx Mixer, I get an error message: “No mixer device drivers available.”
  • My audio output is way too loud.
  • My input signals are too low.
  • After playing audio that had a sample rate of 44.1kHz, playback was attempted of a 22kHz file and the beginning of the file was truncated. Why?
  • When I play audio with different sample rates, I hear a click through my speakers when my Lynx card responds to the new sample rate. How come?
  • After installing OS X driver build 46 or above, I get Kernel Panics when launching or closing my audio software.


My computer is not recognizing the Lynx card. What could be wrong?
Windows 2000/XP
  1. Verify that the Lynx card is properly seated in a PCI slot.
  2. Download and run the latest firmware updater from the Lynx Support Website. Then try installing the driver.
  3. Check Windows Device Manager (Control Panel> System> Hardware> Device Manager. If there is a yellow exclamation mark next to the LynxTWO in Sound, Video and Game Controllers, then there is the possibility that the card is conflicting with another system device. Power down the computer and try placing the card into a different PCI slot to resolve the conflict.
  4. Try removing the card and cleaning the PCI contacts with a soft, clean cloth and Isoprophyl. Sometimes residue can prevent good communication with the PCI bus.
  5. Run the ShowLynx (Available from http://www.lynxstudio.com/support_downloads.asp) utility from a command prompt and email the resulting text file to Lynx technical support
Mac OS9 & OSX
  1. Verify that the Lynx card is properly seated in a PCI slot.
  2. # Download and run the latest firmware updater from the Lynx Support Website. Then try installing the driver.
  3. Try removing the card and cleaning the PCI contacts with a soft, clean cloth and Isoprophyl. Sometimes residue can prevent good communication with the PCI bus.

Home | Products | News & Events | Support | How To Buy | Company | Contact Us | Employment | Privacy

Lynx on Facebook   Support on Facebook 		© Copyright 2024, Lynx Studio Technology, Inc.