Lynx Studio Technology
home products news & events support how to buy company contact
Search
Support Center
Downloads
Contact Tech Support

Frequently Asked Questions
Aurora
LynxONE
LynxTWO/L22
Lynx AES16 / AES16e
Lynx LS-ADAT / LS-AES
LT-HD

Software Application Notes
Hardware Test Procedures
Connector Pin Outs
Other useful documents
Videos
Support Documents
Support Forum
User Manuals
Register Your Products
Buy Cables Now
LynxTWO/L22
• Getting Started/Installation
• Troubleshooting
• Operation
• Compatibility


  • Running an ASIO application and bit-depth says 32-bit in Lynx Mixer despite project bit-depth.
  • When playing back a stereo sound file through any of the outputs, there is signal on the analog inputs.
  • The Lynx Mixer reports a sample rate of 22k when I first boot into Windows. Why?
  • I’m trying to send audio out of the digital outputs and there is no signal being received by my destination device.
  • I cannot change the clock source in the Lynx Mixer – it keeps reverting back to the previous setting
  • My computer is not recognizing the Lynx card. What could be wrong?
  • I installed your Version 2/ WDM drivers and now I’m not getting meter activity in my application.
  • I get clicks and pops when I increase my sample rate to 96k. Is there a compatibility problem?
  • When I log into my Windows 2000/XP computer as an Administrator everything works fine. When I log in as a User, I cannot use my LynxTWO/L22. When launching the Lynx Mixer, I get an error message: “No mixer device drivers available.”
  • My audio output is way too loud.
  • My input signals are too low.
  • After playing audio that had a sample rate of 44.1kHz, playback was attempted of a 22kHz file and the beginning of the file was truncated. Why?
  • When I play audio with different sample rates, I hear a click through my speakers when my Lynx card responds to the new sample rate. How come?
  • After installing OS X driver build 46 or above, I get Kernel Panics when launching or closing my audio software.


I’m trying to send audio out of the digital outputs and there is no signal being received by my destination device.
All OS

With the LynxTWO/ L22 properly installed in your computer, the inputs and outputs will be available to applications as record and play devices. The default setting for the LynxTWO/L22 card is that the Record 4 device is routed from the digital input, and the Play 4 device is routed to the digital output. Most, if not all, third party applications provide device selection in configuration, options, or preference setting windows or menus. A separate selection option is typically provided for the input(s) or recording device(s) and the output(s) or playback device(s). Choose Play 4 for the playback device and Record 4 for the record device when you want to access the digital outputs and inputs on the Lynx card.

Home | Products | News & Events | Support | How To Buy | Company | Contact Us | Employment | Privacy

Lynx on Facebook   Support on Facebook 		© Copyright 2024, Lynx Studio Technology, Inc.