Lynx Studio Technology
home products news & events support how to buy company contact
Search
Support Center
Downloads
Contact Tech Support

Frequently Asked Questions
Aurora
LynxONE
LynxTWO/L22
Lynx AES16 / AES16e
Lynx LS-ADAT / LS-AES
LT-HD

Software Application Notes
Hardware Test Procedures
Connector Pin Outs
Other useful documents
Videos
Support Documents
Support Forum
User Manuals
Register Your Products
Buy Cables Now
LT-HD
Getting Started/Installation
Troubleshooting
Operation
Compatibility


  • How do I install an LT-HD card and confirm that it is functional
  • How do I determine if I have the current firmware on my LT-HD and Aurora.
  • How do I program the firmware on the LT-HD?


How do I program the firmware on the LT-HD?
The LT-HD can be programmed via a MIDI connection with a Windows or OS X computer. The Aurora Firmware Updater and instructions for use are available from the .
Follow these steps to program the LT-HD:

1. Establish a MIDI connection to and from your Aurora.
2. Run the current Aurora firmware updater and program the Aurora with the latest firmware (revision 22 or above). If the firmware is already current, you can skip to step 4.
3. Turn off AND unplug the Aurora. Then plug it back in and turn it on.
4. Run the firmware updater again. This time select the LT-HD as the "Unit to Update".
5. After programming the LT-HD, again turn off and unplug the Aurora. Then plug it back in and turn it on.

The Aurora and LT-HD will now be up to date and ready to use.


Home | Products | News & Events | Support | How To Buy | Company | Contact Us | Employment | Privacy

Lynx on Facebook   Support on Facebook
© Copyright 2024, Lynx Studio Technology, Inc.