Lynx Studio Technology
home products news & events support how to buy company contact
Search
Support Center
Downloads
Contact Tech Support

Frequently Asked Questions
Aurora
LynxONE
LynxTWO/L22
Lynx AES16 / AES16e
Lynx LS-ADAT / LS-AES
LT-HD

Software Application Notes
Hardware Test Procedures
Connector Pin Outs
Other useful documents
Videos
Support Documents
Support Forum
User Manuals
Register Your Products
Buy Cables Now
Lynx AES16 / AES16e
Getting Started/Installation
Troubleshooting
Operation
Compatibility


  • Running an ASIO application and bit-depth says 32-bit in Lynx Mixer despite project bit-depth.
  • I’m using the AES16 / AES16e in Dual Wire mode, recording at 192KHz, but the Digital In Sample Rate reported in the Lynx is 96KHz – is this correct?
  • The Lynx Mixer reports a sample rate of 22k when I first boot into Windows. Why?
  • I cannot change the clock source in the Lynx Mixer – it keeps reverting back to the previous setting
  • My computer is not recognizing the Lynx card. What could be wrong?
  • I installed your Version 2/ WDM drivers and now I’m not getting meter activity in my application.
  • I get clicks and pops when I increase my sample rate to 96k. Is there a compatibility problem?
  • When I log into my Windows 2000/XP computer as an Administrator everything works fine. When I log in as a User, I cannot use my AES16. When launching the Lynx Mixer, I get an error message: “No mixer device drivers available.”
  • My audio output is way too loud.
  • After installing OS X driver build 46 or above, I get Kernel Panics when launching or closing my audio software.


After installing OS X driver build 46 or above, I get Kernel Panics when launching or closing my audio software.
OS X
This can be caused by the Lynx MIDI driver. Remove the driver from Library>Audio>MIDI Drivers > Lynx MIDI Plug-In.

Home | Products | News & Events | Support | How To Buy | Company | Contact Us | Employment | Privacy

Lynx on Facebook   Support on Facebook
© Copyright 2024, Lynx Studio Technology, Inc.