Lynx Support Forum - Configuring Lynx 8 to Burl B2

Print Page | Close Window

Configuring Lynx 8 to Burl B2

Printed From: Lynx Studio Technology, Inc.
Category: Lynx Forum
Forum Name: Lynx Support Forum
Forum Description: Discussions about Lynx Hardware & Software
URL: https://www.lynxstudio.net/forum/forum_posts.asp?TID=6535
Printed Date: May/16/2024 at 1:55pm
Software Version: Web Wiz Forums 11.04 - http://www.webwizforums.com

Topic: Configuring Lynx 8 to Burl B2

Posted By: gfunny72
Subject: Configuring Lynx 8 to Burl B2
Date Posted: December/27/2017 at 10:22am

i'm trying to use the Burl B2 Analog to Digital converter to work with 2 channels on the Lynx as the interface - using AES cables - I can't get it to work. I assigned the 2 appropriate channels to Digital In.
Can someone help?

Replies:

Posted By: David A Hoatson
Date Posted: December/27/2017 at 12:31pm

What Lynx product are you using?

-------------
Thank you,

David A. Hoatson
Lynx Studio Technology, Inc.
Co-founder, Chief Software Engineer

Posted By: gfunny72
Date Posted: December/27/2017 at 12:34pm

Thanks for replying! The older Aurora 8

Posted By: gfunny72
Date Posted: December/27/2017 at 12:36pm

I'm a Co-founder, Chief Software Engineer myself! Different field though - B4Health

Posted By: David A Hoatson
Date Posted: December/27/2017 at 1:15pm

That would be the "Classic" Aurora 8 :-).

You will need to use Aurora Remote Control to do the routing and make sure the Aurora is in REMOTE routing for the TO DIGITAL OUT (all three LEDs on).

What interface are you connecting the Aurora 8 to the computer with?

-------------
Thank you,

David A. Hoatson
Lynx Studio Technology, Inc.
Co-founder, Chief Software Engineer

Posted By: gfunny72
Date Posted: December/27/2017 at 1:20pm

Ok I need to purchase the remote control? I'm going through Ethernet to an IMAC

Posted By: gfunny72
Date Posted: December/27/2017 at 1:24pm

Oh the Software you mean? (aurora remote control) I did try that - I sent the AES channels coming out of the B2 to the Dsub cable on channels 5-6 and then in the software - changed channels 5-6 from Analog In to DIgital In.

Posted By: PaulTech
Date Posted: December/27/2017 at 5:38pm

You are connecting to the computer via Dante?

-------------
Paul Erlandson
Lynx Studio Technology
Support
714-545-4700 x 206
http://www.facebook.com/lynxsupport" rel="nofollow - Lynx Support and Updates on Facebook!

Posted By: gfunny72
Date Posted: December/27/2017 at 7:26pm

No I'm not using Dante - i thought i could connect the Burl to the computer THRU the Aurora - no?

Posted By: gfunny72
Date Posted: December/27/2017 at 7:36pm

I"m using USB to computer

Posted By: gfunny72
Date Posted: December/27/2017 at 8:23pm

Ok it looks like i need CBL-DIGY85 cable to connect to the Digital I/O …can you confirm?

Posted By: gfunny72
Date Posted: December/27/2017 at 8:24pm

Do I need to sync the clocking between these 2 devices? I am using the aurora for DA - to my hardware audio inserts (compressors, eqs) then the Burl for AD back in - through the Aurora digital in - into computer

Posted By: Mike N
Date Posted: December/28/2017 at 9:21am

Yes, if the Burl has AES on XLR, you will need the CBL-DIGY85 cable

You also do need to clock the units together via 75 Ohm BNC (basic video) cables.

-------------
Michael Nicoletti
Lynx Studio Technology
Sales & Support Coordinator
714-545-4700 Ext. 211

Posted By: gfunny72
Date Posted: December/28/2017 at 10:11pm

Ok - would you recommend making the Aurora or the Burl the Master?

Posted By: Mike N
Date Posted: December/29/2017 at 10:03am

You can of course try both and see which you prefer, but the Aurora has a super low-jitter clock that is just stellar.

-------------
Michael Nicoletti
Lynx Studio Technology
Sales & Support Coordinator
714-545-4700 Ext. 211