Direct monitoring - aes16e and Aurora 16
Printed From: Lynx Studio Technology, Inc.
Category: Lynx Forum
Forum Name: Lynx Support Forum
Forum Description: Discussions about Lynx Hardware & Software
URL: https://www.lynxstudio.net/forum/forum_posts.asp?TID=5629
Printed Date: May/18/2024 at 11:37am
Software Version: Web Wiz Forums 11.04 - http://www.webwizforums.com
Topic: Direct monitoring - aes16e and Aurora 16
Posted By: AB77
Subject: Direct monitoring - aes16e and Aurora 16
Date Posted: April/20/2015 at 1:39pm
|
I am using Sonar Platinum with a Lynx AES16e card and Aurora 16. At one time until recently, I could always hearing my live mic(s) when clicking on record in Sonar. Now I have to click on input echo on the Sonar program as well to hear the live mics. Is there something in the AES16e or Aurora software that allows for direct monitoring of these live mics without having to use the input echo (monitoring I suppose) in Sonar? THANKS FOR YOUR HELP! AB
|
Replies:
Posted By: Mike N
Date Posted: April/20/2015 at 4:11pm
There is a way to do that, but have you also tried this: Global Input Echo button. The Input Echo On/Off All Tracks button  in the Control Bar’s Mix module turns input monitoring on or off on all audio tracks with one click.------------- Michael Nicoletti Lynx Studio Technology Sales & Support Coordinator 714-545-4700 Ext. 211 |
Posted By: AB77
Date Posted: April/20/2015 at 5:30pm
|
Is the echo button part of the Lynx AES16e software or the Aurora. I assume the AES16e. THANKS! Alan
|
Posted By: Mike N
Date Posted: April/21/2015 at 9:17am
|
Hi Alan, Apologies for the confusion...What I posted was taken from the Sonar manual... ------------- Michael Nicoletti Lynx Studio Technology Sales & Support Coordinator 714-545-4700 Ext. 211 |
Posted By: AB77
Date Posted: April/21/2015 at 2:27pm
| Does the lynx AES16e software allow for direct monitoring of the signal coming in? It use to do so. I hope the latest does. |
Posted By: Mike N
Date Posted: April/21/2015 at 3:09pm
|
Yes absolutely. With the latest driver for AES16e, you select an Output from the bottom section of the Mixer. When you do that, ALL sources above the Outputs feed that selected output....Inputs at the top row of faders, Play channels from the computer in the middle row. ------------- Michael Nicoletti Lynx Studio Technology Sales & Support Coordinator 714-545-4700 Ext. 211 |
Posted By: AB77
Date Posted: April/21/2015 at 6:15pm
| Yes. And I had to click on the "m" on top to have that channel be unmuted and allow the microphone to be heard. I love the new mixer by the way. Great job. I just forgot about how to do that unmuting! |
Posted By: Mike N
Date Posted: April/22/2015 at 9:26am
|
Ahh yes, excellent point. The default is that only Play channels assigned to their default outputs (1 to 1 assigns) are Unmuted. ------------- Michael Nicoletti Lynx Studio Technology Sales & Support Coordinator 714-545-4700 Ext. 211 |