UA Satellite and Aurora 16
Printed From: Lynx Studio Technology, Inc.
Category: Lynx Forum
Forum Name: Lynx Support Forum
Forum Description: Discussions about Lynx Hardware & Software
URL: https://www.lynxstudio.net/forum/forum_posts.asp?TID=5597
Printed Date: May/13/2024 at 8:00pm
Software Version: Web Wiz Forums 11.04 - http://www.webwizforums.com
Topic: UA Satellite and Aurora 16
Posted By: JamJuice
Subject: UA Satellite and Aurora 16
Date Posted: March/11/2015 at 1:13pm
|
Hi there - I've been using my Aurora 16 with the TB card and OSX 10.8.5 on my Macbook Pro with no problems. Recently I've added a UA Satellite TB and now I cannot operate at the same low buffer settings without pops. At 256 samples is usually ok but that means loosing the low sample rate (64/128). Does anyone have any advice for this setup? Thanks! Jam.
|
Replies:
Posted By: JamJuice
Date Posted: March/12/2015 at 2:36pm
Has no one else experienced this? I'm hoping not. 
|
Posted By: David A Hoatson
Date Posted: March/12/2015 at 2:43pm
|
How do you have the UA & LT-TB connected to the MacBook Pro? If you connect the UA first then the Aurora-TB does that make a difference? How about the other way around? ------------- Thank you, David A. Hoatson Lynx Studio Technology, Inc. Co-founder, Chief Software Engineer |
Posted By: JamJuice
Date Posted: March/13/2015 at 1:04pm
|
Hi David - I connect the Aurora first, then the UA. I have tried both ways but no difference. Thanks
|
Posted By: JamJuice
Date Posted: March/17/2015 at 12:35pm
|
Is there anything else I can try? Thanks
|
Posted By: PaulTech
Date Posted: March/18/2015 at 11:08am
|
Is the UA by itself capable of lower buffer sizes without distortion? If not, whenever you use multiple devices in an aggregate, you'll be restrained to performance of the least efficient member of the aggregate. Could you connect the Satellite via AES digital rather than Thunderbolt? That could be a solution. ------------- Paul Erlandson Lynx Studio Technology Support 714-545-4700 x 206 http://www.facebook.com/lynxsupport" rel="nofollow - Lynx Support and Updates on Facebook! |
Posted By: JamJuice
Date Posted: March/25/2015 at 1:11pm
|
Can you explain the "Satellite via AES digital rather than Thunderbolt"? I'm not sure I know how. Thanks
|
Posted By: PaulTech
Date Posted: March/30/2015 at 4:21pm
|
Sorry, I just checked the product page for the Satellite and that is not an option. Does your MacBook have two thunderbolt ports? If so, you can try connecting them independently. Otherwise, you might check with UA, there may be some tips to improve its efficiency. ------------- Paul Erlandson Lynx Studio Technology Support 714-545-4700 x 206 http://www.facebook.com/lynxsupport" rel="nofollow - Lynx Support and Updates on Facebook! |