E22 Analog output

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic


   The meters are driven by the DAC, so if you get meters and no sound the most likely explanation is the cable.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
PaulTech Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Joined: August/13/2004 Location: United States Points: 5495	Topic: E22 Analog output Posted: August/10/2017 at 4:59pm
	The meters are driven by the DAC, so if you get meters and no sound the most likely explanation is the cable.
	Paul Erlandson Lynx Studio Technology Support 714-545-4700 x 206 Lynx Support and Updates on Facebook!

m17xr2b Members Profile Send Private Message Find Members Posts Add to Buddy List Caracal Joined: July/30/2017 Location: UK Points: 4	Posted: August/01/2017 at 12:05am
	I have measured the output between pins 7 and 20 with a multimeter and it's exactly 0 when playing a test tone. Also I built the cable myself so at this point either the card is defective or the pins are incorrect the manual where 7 and 10 are hot, 8 and 11 ground and 20 and 23 negative

m17xr2b Members Profile Send Private Message Find Members Posts Add to Buddy List Caracal Joined: July/30/2017 Location: UK Points: 4	Posted: July/31/2017 at 11:34pm
	Yes the meters for Output 1 & 2 are working and in sync with Play 01+02 and Digital Out 1.

Mike N Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Sales & Support Coordinator Joined: November/13/2008 Location: Costa Mesa, CA Points: 2488	Posted: July/31/2017 at 10:32am
	Hi. Sorry you are having this issue. Are there meters in Lynx Mixer for Outputs 1 & 2?
	Michael Nicoletti Lynx Studio Technology Sales & Support Coordinator 714-545-4700 Ext. 211

m17xr2b Members Profile Send Private Message Find Members Posts Add to Buddy List Caracal Joined: July/30/2017 Location: UK Points: 4	Posted: July/30/2017 at 12:48pm
	Hello all, I've been using the E22 with digital out for a couple of months without issues. I'm now trying to use the analog XLR output but for some reason I cannot get any sound. I have tried with both firmware versions and 23.a and 23.b drivers. The 23.e/g don't recognise the card on Win10 even if I have all the updates installed. Even still the 1AOut2 output shows it's active just like the Digital output but I don't get any sound on tested equipment. I have checked the volume is on max and mute disabled. Is there anything really obvious I'm missing or I have a defective unit?