Author |
Topic Search Topic Options
|
Eirik
Bobcat
Joined: March/11/2006
Location: Norway
Points: 52
|
Topic: Hilo or AES16e/internal clock best? Posted: June/27/2016 at 1:38pm |
So I have a couple of Hilo's feeding digtial to a AES16e-50 card.
Would you advice me to use the Hilo's clock to WC the Aes16e, or the other way around?
Obviously the easiest is to clock the hilo's (and daisy chain the rest of my digital gear from those again) from the internal/AES16e-WC-output. Then everything switches automatically down the line whenever I load a 48k or 44k project into the PC - but maybe the Hilo-clock is that much better its worth changing manually for each project/file loaded with different rate? Any advice?
Best, Eirik
|
1 AES16e-50 - 2 Hilo's 3 LynxII C's & 2 LSAES
|
|
Mike N
Admin Group
Sales & Support Coordinator
Joined: November/13/2008
Location: Costa Mesa, CA
Points: 2488
|
Posted: June/27/2016 at 3:15pm |
Hi Eirik,
According to our chief hardware engineer, it is better to use the clock closest to the converter. So, in this case, make the Hilo the master and the AES16e-50 the slave.
It is not too much of an issue in your setup though, since both devices use our SynchroLock technology when slaving to external clock.
|
Michael Nicoletti Lynx Studio Technology Sales & Support Coordinator 714-545-4700 Ext. 211
|
|
Eirik
Bobcat
Joined: March/11/2006
Location: Norway
Points: 52
|
Posted: June/27/2016 at 3:58pm |
Thanks a lot Michael, and as I have two Hilo's - then (If I understand correctly), his advice is this :
Silver hilo = Master - WC clock out to Black Hilo - then to AES16e - then further down the line..
Or is it: Silver Hilo = Master - WC to AES16e - back to Black Hilo - then further on.. ?
Best Eirik
|
1 AES16e-50 - 2 Hilo's 3 LynxII C's & 2 LSAES
|
|
Mike N
Admin Group
Sales & Support Coordinator
Joined: November/13/2008
Location: Costa Mesa, CA
Points: 2488
|
Posted: June/27/2016 at 4:42pm |
Nice!! "I'll see your silver Hilo and raise you a black one." Hmmm...I would think Hilo --> Hilo --> AES16e especially if that means 2 of the 3 WC cables are kept shorter...
|
Michael Nicoletti Lynx Studio Technology Sales & Support Coordinator 714-545-4700 Ext. 211
|
|
Eirik
Bobcat
Joined: March/11/2006
Location: Norway
Points: 52
|
Posted: June/28/2016 at 12:07am |
Haha :-D - thanks again!
BR Eirik
|
1 AES16e-50 - 2 Hilo's 3 LynxII C's & 2 LSAES
|
|