LT-Adat routing

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi,

LT-ADAT gives you additional routing options, but Aurora 16 will still be 16 channels total.

Since you have an AES16e, you should use an LS-ADAT daughter card connected to AES16e. You can then set the driver to be in 32 channel mode and have the 16 AES channels and 16 ADAT channels.

If you like, please contact us at support@lynxstudio.com. We can send the parts to you to convert the LT card to an LS card for a nominal charge.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Mike N Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Sales & Support Coordinator Joined: November/13/2008 Location: Costa Mesa, CA Points: 2488	Topic: LT-Adat routing Posted: May/30/2014 at 3:48pm
	Hi, LT-ADAT gives you additional routing options, but Aurora 16 will still be 16 channels total. Since you have an AES16e, you should use an LS-ADAT daughter card connected to AES16e. You can then set the driver to be in 32 channel mode and have the 16 AES channels and 16 ADAT channels. If you like, please contact us at support@lynxstudio.com. We can send the parts to you to convert the LT card to an LS card for a nominal charge.
	Michael Nicoletti Lynx Studio Technology Sales & Support Coordinator 714-545-4700 Ext. 211

SonasRec Members Profile Send Private Message Find Members Posts Add to Buddy List Caracal Joined: November/16/2010 Points: 16	Posted: May/29/2014 at 5:24pm
	I use an aurora 16 with lt-adat into aes16e. I'd like to be able mirror my analogue & digital outputs, so i can send headphone monitor mixes out digitally through the adat card while tracking. Then for mixing, i'd like to be able to re-route track outputs for analogue summing, My understanding of the remote software is limited (despite reading your manuals) & I can mirror analogue & adat outs, but when I do, I lose my analogue inputs. Can you suggest the settings on the aurora remote software that might achieve this? Thanks