Simultaneous output via tb and digital I/O?

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi fellow Lynx users,

I am wondering if any of you know if it is possible to run a signal out of the I/O ports simutaneously with the tb card in the Aurora?

I've started a ticket regarding this already. But since it's the start of the weekend, and I hope the awesome supprters at Lynx actually take some time off, I thought I'd pick your brains here in the meantime. 

So, here's the situation.
I have 3 Auroras, and a few weeks ago, with great help from Paul Erlandson, I converted my system to thunderbolt. It is now up and running, and it works just great. BUT: I did not consider the fact that I also had an adat card piggybacking one of the pci-e cards in my old setup. That card fed my cue system for the musicians. I've come up with a temporary solution, but it is not in any way great, particularly convenient, or fit for more than 1 person at a time.

So, I am hoping there's a way. If anyone has any other ways of doing this, I'd love for you to chime in as well.

Have a great day!

Thanks,
Kai

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
allbuttonmode Members Profile Send Private Message Find Members Posts Add to Buddy List Caracal Joined: January/16/2014 Location: Norway Points: 14	Topic: Simultaneous output via tb and digital I/O? Posted: June/25/2016 at 3:45am
	Hi fellow Lynx users, I am wondering if any of you know if it is possible to run a signal out of the I/O ports simutaneously with the tb card in the Aurora? I've started a ticket regarding this already. But since it's the start of the weekend, and I hope the awesome supprters at Lynx actually take some time off, I thought I'd pick your brains here in the meantime. So, here's the situation. I have 3 Auroras, and a few weeks ago, with great help from Paul Erlandson, I converted my system to thunderbolt. It is now up and running, and it works just great. BUT: I did not consider the fact that I also had an adat card piggybacking one of the pci-e cards in my old setup. That card fed my cue system for the musicians. I've come up with a temporary solution, but it is not in any way great, particularly convenient, or fit for more than 1 person at a time. So, I am hoping there's a way. If anyone has any other ways of doing this, I'd love for you to chime in as well. Have a great day! Thanks, Kai

Mike N Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Sales & Support Coordinator Joined: November/13/2008 Location: Costa Mesa, CA Points: 2488	Posted: June/27/2016 at 10:20am
	Hi Kai, Happy to tell you that you can absolutely send to the Digital as well as the Analog outs with LT-TB. Aurora should be put into 32 channel mode. This is done in the Lynx Mixer under Settings/Advanced/Adapter Settings. In that window, select the Aurora that you wish to change, and set the Channel Mode to 32-Channel. Click SAVE and reboot the computer (since this changes the driver). That Aurora will now have all 16 analog and all 16 digital I/O available to you.
	Michael Nicoletti Lynx Studio Technology Sales & Support Coordinator 714-545-4700 Ext. 211

allbuttonmode Members Profile Send Private Message Find Members Posts Add to Buddy List Caracal Joined: January/16/2014 Location: Norway Points: 14	Posted: June/27/2016 at 10:30am
	Mike, thank you for the info. Great news! Edited by allbuttonmode - June/27/2016 at 10:31am