Aurora 16HD and Focusrite rednet 5

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi,

Sorry for the late response.

There should be no issues, as Rednet 5 is compatible with Pro Tools HD as well. You can run each unit in 16 channel mode and daisy-chain them, or have each unit in 32 channel mode and connect them to their own ports on the Core and Accel cards.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Mike N Members Profile Send Private Message Find Members Posts Add to Buddy List Admin Group Sales & Support Coordinator Joined: November/13/2008 Location: Costa Mesa, CA Points: 2488	Topic: Aurora 16HD and Focusrite rednet 5 Posted: October/22/2015 at 10:04am
	Hi, Sorry for the late response. There should be no issues, as Rednet 5 is compatible with Pro Tools HD as well. You can run each unit in 16 channel mode and daisy-chain them, or have each unit in 32 channel mode and connect them to their own ports on the Core and Accel cards.
	Michael Nicoletti Lynx Studio Technology Sales & Support Coordinator 714-545-4700 Ext. 211

Yaroslav Members Profile Send Private Message Find Members Posts Add to Buddy List Caracal Joined: October/15/2015 Location: RUSSIA Points: 2	Posted: October/15/2015 at 10:53pm
	Hi! Decided to update studio. before there was ProTools HD 7.2.1 hardware decisions look so: macpro 1.1 didgidesing magma with cards of HDCore and two Accel card. two interfaces 192io. After unsuccessful updates of a firmware 192io it don't join and to be in the mode with a yellow ring on the switching on button. Repair is possible only at plant of the vendor, for us it isn't profitable, it is necessary to send from Russia to Ireland. Decided to buy the Lynx Studio the Aurora 16HD and Focusrite rednet 5. Will work Aurora 16HD and Focusrite rednet 5? Focusrite selected because of existence by Dante and ability to integrate with yamaha CL5 from a concert hall Edited by Yaroslav - October/15/2015 at 10:55pm